WordPress Xls

Thursday, June 14th, 2007 at 12:56 pm

The Media Revolution in Your Hand (1/3): XL Webinar

Wordpress

$8.57

No Synopsis Available

Crown XLS 602

$499

Crown XLS 602 Crown XLS 602 Description: The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value! Crown XLS 602 Features: Reliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XLS 602 Specifications: Power Output (1 kHz*) Stereo Bridge-Mono 8 Ohm 4 Ohm 8 Ohm XLS 802 500W 800W 1600W XLS 602 380W 600W 1200W XLS 402 300W 450W 900W XLS 202 200W 300W 600W *1 kHz Power: refers to maximum average power in watts at 1 kHz with 0.5% THD. The following applies to units in Stereo mode with 8-ohm loads unless otherwise specified. Performance Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V. Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, -0.8 dB. Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB. Total Harmonic Distortion (THD): Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to -40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: >200. Crosstalk (below rated power) at 1 kHz: -76 dB. at 20 kHz: -58 dB. Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced. Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Controls Level: Two front-panel rotary level controls, one for each channel. Power: Front-panel switch; on when in the IN position. Circuit Breaker: Back-panel breaker provides overload protection. Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode. Indicators Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the

Crown XLS 802

$599

Crown XLS 802 Crown XLS 802 Description: The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value! Crown XLS 802 Features: Reliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XLS 802 Specifications: Power Output (1 kHz*) Stereo Bridge-Mono 8 Ohm 4 Ohm 8 Ohm XLS 802 500W 800W 1600W XLS 602 380W 600W 1200W XLS 402 300W 450W 900W XLS 202 200W 300W 600W *1 kHz Power: refers to maximum average power in watts at 1 kHz with 0.5% THD. The following applies to units in Stereo mode with 8-ohm loads unless otherwise specified. Performance Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V. Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, -0.8 dB. Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB. Total Harmonic Distortion (THD): Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to -40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: >200. Crosstalk (below rated power) at 1 kHz: -76 dB. at 20 kHz: -58 dB. Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced. Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Controls Level: Two front-panel rotary level controls, one for each channel. Power: Front-panel switch; on when in the IN position. Circuit Breaker: Back-panel breaker provides overload protection. Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode. Indicators Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the

Crown XLS 202

$299

Crown XLS 202 Crown XLS 202 Description: The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value! Crown XLS 202 Features: Reliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XLS 202 Specifications: Power Output (1 kHz*) Stereo Bridge-Mono 8 Ohm 4 Ohm 8 Ohm XLS 802 500W 800W 1600W XLS 602 380W 600W 1200W XLS 402 300W 450W 900W XLS 202 200W 300W 600W *1 kHz Power: refers to maximum average power in watts at 1 kHz with 0.5% THD. The following applies to units in Stereo mode with 8-ohm loads unless otherwise specified. Performance Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V. Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, -0.8 dB. Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB. Total Harmonic Distortion (THD): Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to -40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: >200. Crosstalk (below rated power) at 1 kHz: -76 dB. at 20 kHz: -58 dB. Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced. Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Controls Level: Two front-panel rotary level controls, one for each channel. Power: Front-panel switch; on when in the IN position. Circuit Breaker: Back-panel breaker provides overload protection. Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode. Indicators Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the

Crown XLS 402

$399

Crown XLS 402 Crown XLS 402 Description: The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsreliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value! Crown XLS 402 Features: Reliable design incorporates many popular features Housed in a rugged, all-steel 2U chassis Efficient forced-air fans prevent excessive thermal buildup Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XLS 402 Specifications: Power Output (1 kHz*) Stereo Bridge-Mono 8 Ohm 4 Ohm 8 Ohm XLS 802 500W 800W 1600W XLS 602 380W 600W 1200W XLS 402 300W 450W 900W XLS 202 200W 300W 600W *1 kHz Power: refers to maximum average power in watts at 1 kHz with 0.5% THD. The following applies to units in Stereo mode with 8-ohm loads unless otherwise specified. Performance Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V. Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, -0.8 dB. Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB. Total Harmonic Distortion (THD): Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to -40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: >200. Crosstalk (below rated power) at 1 kHz: -76 dB. at 20 kHz: -58 dB. Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced. Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Controls Level: Two front-panel rotary level controls, one for each channel. Power: Front-panel switch; on when in the IN position. Circuit Breaker: Back-panel breaker provides overload protection. Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode. Indicators Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the

AKG C414 XLS

$999

AKG C414 XLS The AKG C 414 XLS condenser microphone offers 9 pickup patterns for you to choose the perfect setting for every application. For live-sound applications and permanent installations, all of the AKG C 414 mic's controls can be disabled easily for trouble-free use. A Peak Hold LED displays even shortest overload peaks. It's predecessor, AKG's legendary C 414 needs no introduction—it is an audio tool found in most recording studios and has been used on thousands of hit records. It's been on stage with artists of every musical genre and is also used by leading broadcast facilities the world over. The AKG C 414 XLS microphone has been created to be just as popular. The AKG C 414 XLS maintains the sonic character of the legendary AKG C 414 B-ULS, the longest-lived AKG C 414 model. Engineered for highest linearity and neutral sound, it has been one of the most universal and versatile large diaphragm microphone for decades. Widely used for accurate, beautifully detailed pickup of any acoustic instrument the new AKG C 414 XLS microphone combines proven reference quality, leading-edge technology, and state-of-the-art components. AKG delivers the C 414 XLS microphone complete with carrying case, pop filter, windscreen, and spider-type shock mount. For over 60 years, leading musicians and engineers have used legendary AKG microphones to capture their sound so their audience hears every nuance. The C 414 family has been one of the world's most widely-used and respected studio and stage microphones in audio history. AKG has continually set new benchmarks for useful features, improved technical specifications, and ease of use to answer requests from ever-demanding recording studios, broadcast stations and audio engineers. Features: Nine selectable pickup patterns enable to choose the perfect setting for every application Lock Mode: all controls can be disabled easily for trouble-free use Peak Hold LED even detects shortest overload peaks Incredible Dynamic Range of 152dB Three switchable different bass cut filters and three pre-attenuation levels Leading-edge technology and state-of-the-art components ensure shortest signal path and extra protection against moisture Designed, engineered, and built in Vienna, Austria Ideal for: Professional studio recording Professional stage miking Lead vocals & lead instruments Classical music recording Drum overhead miking Ensemble recording Get Your AKG C414 XLS Today!